NTSB Final Report: Cessna 180A | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Mon, Mar 04, 2024

NTSB Final Report: Cessna 180A

Failure Of The Landing Gear Float Due To Inadequate Maintenance Of The Floats And Corrosion

Location: Skwentna, Alaska Accident Number: ANC22LA080
Date & Time: September 25, 2022, 13:00 Local Registration: N9728B
Aircraft: Cessna 180A Aircraft Damage: Substantial
Defining Event: Sys/Comp malf/fail (non-power) Injuries: 1 Fatal
Flight Conducted Under: Part 91: General aviation - Personal

Analysis: The pilot was departing on a cross-country flight in a float-equipped airplane when the accident occurred. She had contacted a family member and stated she was departing; however, she did not arrive at the destination when expected. A search was initiated, and the airplane was located partially submerged in the departure lake.

Postaccident examination of the wreckage revealed that both floats were heavily corroded and separated from the fuselage. There was no evidence that either float had contacted a foreign object in the water. A portion of the hull on the right float tore open and bent back.

It is likely that tear in the float resulted in the airplane impacting the water during the takeoff. Maintenance records were not available for review during the investigation.

Though toxicology testing of the pilot’s tissue detected diazepam and venlafaxine and their metabolites in the pilot’s system, it is unlikely that the effects of these medications contributed to this accident.

Probable Cause and Findings: The National Transportation Safety Board determines the probable cause(s) of this accident to be -- The failure of the landing gear float due to inadequate maintenance of the floats and corrosion.

FMI: www.ntsb.gov

Advertisement

More News

Sierra Space Repositions Dream Chaser for First Mission

With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC