Wed, Aug 02, 2017
AD NUMBER: 2017-14-03
PRODUCT: Sikorsky Aircraft Corporation (Sikorsky) Model S-92A helicopters
ACTION: Final Rule.
SUMMARY: This AD requires an inspection and reduces the retirement lives of certain landing gear components.
This AD is prompted by a revised analysis of the fatigue life of the landing gear.
DATES: This AD becomes effective August 11, 2017.
COST: The FAA estimates that this AD will affect 80 helicopters of U.S. Registry. They estimate that operators may incur the following costs in order to comply with this AD.
At an average labor rate of $85 per hour:
- Replacing a wheel axle P/N 2392-2334-001 will require 2 work-hours and required parts cost $22,000, for a cost per helicopter of $22,170.
- Replacing a MLG or NLG threaded hinge pin P/N 2392-2311-003 will require 1 work-hour and required parts cost $3,800, for a cost per helicopter of $3,885.
- Replacing a NLG cylinder P/N 2392-4006-005 will require 1 work-hour and required parts cost $27,200, for a cost per helicopter of $27,285.
- Replacing a NLG hinge pin P/N 2392-4312-003 will require 1 work-hour and required parts cost $4,400, for a cost per helicopter of $4,485.
- Replacing a landing gear actuator rod end P/N 2392-0876-901 will require 1 work-hour and required parts cost $900, for a cost per helicopter of $985.
- Inspecting the NLG airframe fitting assembly P/N 92209-01101-041 will require 8 workhours, and required parts cost is minimal, for a cost of $680 per helicopter and $54,400 for the U.S. fleet.
- If required, replacing a NLG actuator fitting P/N 92209-01101-101 would require 70 workhours, and required parts cost $10,000, for a cost per helicopter of $15,950.
FMI: AD
More News
With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]
Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]
“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]
"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]
IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]