AD: Aspen Avionics, Inc. | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-NextGen-04.30.24

Airborne-Unlimited-05.01.24 Airborne-AffordableFlyers--05.02.24

Airborne-Unlimited-05.03.24

Wed, Aug 19, 2020

AD: Aspen Avionics, Inc.

AD 2020-16-08 Prompted By An Automatic Reset Occurring When The Display Internal Monitor Detects A Potential Fault

The FAA is adopting a new airworthiness directive (AD) for certain Aspen Avionics, Inc., Evolution Flight Display (EFD) EFD1000 Emergency Backup Display, EFD1000 Multi-Function Display, and EFD1000 Primary Flight Display systems installed on various airplanes.

This AD imposes operating restrictions on these display systems by revising the Limitations section of the airplane flight manual (AFM). This AD was prompted by an automatic reset occurring when the display internal monitor detects a potential fault, causing intermittent loss of airspeed, attitude, and altitude information during flight. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective August 17, 2020. The FAA must receive comments on this AD by September 14, 2020.

Supplementary Information: On February 25, 2020, Aspen Avionics, Inc. (Aspen), notified the FAA of 35 instances of software interacting with a graphics processing chip defect and causing an automatic reset to occur on Aspen EFD1000 Emergency Backup Display, EFD1000 Multi-Function Display, and EFD1000 Primary Flight Display systems. The reset occurs when the display internal monitor detects a potential fault. The display will go black and then it will restart, which lasts about 50 seconds. In installations where multiple Aspen EFDs serve as the primary and backup attitude, altitude, and airspeed displays instead of independent instruments; this repeat resetting may affect both Aspen units, resulting in loss of all attitude, altitude, and airspeed information during the reset period. Loss of all airspeed, attitude, and altitude information during flight may cause a loss of control of the airplane in instrument meteorological conditions (IMC) or at night. The actions required by this AD will restrict operations to flight under visual flight rules (VFR) and prohibit night operations to allow safe operation in the event of a loss of flight display functionality.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Linx (05.02.24)

Aero Linx: Model Aeronautical Association of Australia MAAA clubs are about fun flying, camaraderie and community. For over 75 years, the MAAA has been Australia’s largest fl>[...]

ANN's Daily Aero-Term (05.02.24): Touchdown Zone Lighting

Touchdown Zone Lighting Two rows of transverse light bars located symmetrically about the runway centerline normally at 100 foot intervals. The basic system extends 3,000 feet alon>[...]

Aero-News: Quote of the Day (05.02.24)

“Discovery and innovation are central to our mission at Virgin Galactic. We’re excited to build on our successful record of facilitating scientific experiments in subor>[...]

ANN FAQ: Contributing To Aero-TV

How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]

NTSB Final Report: Cirrus Design Corp SR20

Student Pilot Reported That During Rotation, “All Of A Sudden The Back Of The Plane Kicked To The Right..." Analysis: The student pilot reported that during rotation, “>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC