AD Correction: Lycoming | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-NextGen-04.30.24

Airborne-Unlimited-05.01.24 Airborne-AffordableFlyers--05.02.24

Airborne-Unlimited-05.03.24

Tue, Jun 29, 2004

AD Correction: Lycoming

AD NUMBER: 2004-10-14
MANUFACTURER:
Textron Lycoming (CORRECTION)
SUBJECT: Airworthiness Directive 2004-10-14
SUMMARY: The FAA is adopting a new airworthiness directive (AD) that supersedes an existing AD, for Lycoming Engines (formerly Textron Lycoming), direct-drive reciprocating engines (except O-145, O-320H, O-360E, LO-360E, LTO -360E, O-435, and TIO-541 series engines). That AD currently requires inspection of the crankshaft gear installation and rework or replacement of the gears where necessary after a propeller strike, sudden stop page, at overhaul, or whenever gear train repair is required. This AD requires the same actions but makes the correction that the existing gear retaining bolt and lock plate be removed from service and new hardware installed, and revises the definitions for sudden stoppage and propeller strike. This AD results from a change to the definition of a propeller strike or sudden stoppage. We are issuing this AD to prevent loosening or failure of the crankshaft gear retaining bolt, which may cause sudden engine failure.The FAA is adopting a new airworthiness directive (AD) that supersedes an existing AD, for Lycoming Engines (formerly Textron Lycoming), direct-drive reciprocating engines (except O-145,O-320H, O-360E, LO-360E, LTO -360E, O-435, and TIO-541 series engines). That AD currently requires inspection of the crankshaft gear installation and rework or replacement of the gears where necessary after a propeller strike, sudden stoppage, at overhaul, or whenever gear train repair is required. This AD requires the same actions but makes the correction that the existing gear retaining bolt and lock plate be removed from service and new hardware installed, and revises the definitions for sudden stoppage and propeller strike. This AD results from a change the definition of a propeller strike or sudden stoppage. We are issuing this AD to prevent loosening or failure of the crankshaft gear retaining bolt, which may cause sudden engine failure.

FMI: www.avantext.com/DailyADIndex.ASP?AD=20041014


Advertisement

More News

ANN's Daily Aero-Linx (05.02.24)

Aero Linx: Model Aeronautical Association of Australia MAAA clubs are about fun flying, camaraderie and community. For over 75 years, the MAAA has been Australia’s largest fl>[...]

ANN's Daily Aero-Term (05.02.24): Touchdown Zone Lighting

Touchdown Zone Lighting Two rows of transverse light bars located symmetrically about the runway centerline normally at 100 foot intervals. The basic system extends 3,000 feet alon>[...]

Aero-News: Quote of the Day (05.02.24)

“Discovery and innovation are central to our mission at Virgin Galactic. We’re excited to build on our successful record of facilitating scientific experiments in subor>[...]

ANN FAQ: Contributing To Aero-TV

How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]

NTSB Final Report: Cirrus Design Corp SR20

Student Pilot Reported That During Rotation, “All Of A Sudden The Back Of The Plane Kicked To The Right..." Analysis: The student pilot reported that during rotation, “>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC