Gliders Urged To Squawk 1202 Effective March 7 | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Sat, Feb 25, 2012

Gliders Urged To Squawk 1202 Effective March 7

FAA Responds To NTSB Recommendation To Avoid Mid-Airs

Many aircraft radar transponders have a button which immediately sets the squawk code to 1200, the standard code for VFR traffic not in communication with air traffic control. But the FAA believes it's important for other traffic to know whether your blip is a powered aircraft, so the code 1202 has now been designated the standard for gliders (representative aircraft shown in file photo), effective March 7.

The unique code joins others which are designated for special purposes. 1255 indicates an aircraft en route to or from a designated firefighting area. 1277 indicates an aircraft on a search-and-rescue mission under authorization from the US Coast Guard or US Air Force.

One impetus for the new designation is an NTSB recommendation following the 2006 collision between a Hawker jet and a glider near the Reno/Tahoe International Airport. Following nine deaths in mid-air collisions between gliders and powered aircraft over a 20-year period, the NTSB chastised the FAA in 2008 for failing to make transponders compulsory.

Elizabeth Ray, the FAA Air Traffic Organization VP of Mission Support Services, explains why it's important for other traffic to know you're a glider. In her notice of the change she observes, "Gliders operate under some flight and maneuvering limitations. They may go from essentially stationary targets while climbing and thermaling to moving targets very quickly. They can be expected to make radical changes in flight direction to find lift and cannot hold altitude in a response to an ATC request. Gliders may congregate together for short periods of time to climb together in thermals and may cruise together in loose formations while traveling between thermals."

It's not clear how many gliders have transponders installed. Even modern, solid-state transponders in the 200-watt class draw on the order of two amps at 12 VDC. Gliders generally rely on small, rechargeable batteries or solar generation to run avionics chosen for low current drain.

FMI: www.faa.gov/documentLibrary/media/Notice/N7110.577.pdf

Advertisement

More News

Sierra Space Repositions Dream Chaser for First Mission

With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC