AD NUMBER: 2009-10-09 R2

MANUFACTURER: Cessna Aircraft Company Airplanes
SUBJECT: Airworthiness Directive 2009-10-09 R2
ACTION: Final rule; correction

SUMMARY: The FAA is correcting an airworthiness directive (AD) that published in the Federal Register. That AD applies to certain Cessna Aircraft Company (Cessna) Models 150F, 150G, 150H, 150J, 150K, 150L, 150M, A150K, A150L, A150M, F150F, F150G, F150H, F150J, F150K, F150L, F150M, FA150K, FA150L, FRA150L, FA150M, FRA150M, 152, A152, F152, and FA152 airplanes. There is an error in the compliance instructions. This document corrects that error. In all other respects, the original document remains the same.

In the Federal Register of August 26, 2011, on page 53311, in the 3rd column, Procedures, paragraph (g)(1), Table 2–Actions, Compliance and Procedures, of AD 2009-10-09 R2 is corrected to read as follows:

A person authorized to perform maintenance as specified in 14 CFR 43.3 of the Federal Aviation Administration Regulations (14 CFR 43.3) is required to make the AFM and POH changes, fabricate the placard required in paragraph (g)(1)(ii) of this AD, and make an entry into the aircraft logbook showing compliance with the portion of the AD per compliance with 14 CFR 43.9

DATES: This final rule; correction, is effective November 8, 2011

FMI: AD