Actor Morgan Freeman: Grounded? | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-12.08.25

AirborneNextGen-
12.02.25

Airborne-Unlimited-12.03.25

Airborne-FltTraining-12.04.25

AirborneUnlimited-12.05.25

AFE 2025 LIVE MOSAIC Town Hall (Archived): www.airborne-live.net

Wed, Dec 08, 2004

Actor Morgan Freeman: Grounded?

Cites Incident At Teterboro, Says He's In Dutch With FAA

ANN Note: The following story has been reported in recent general media coverage... though some of the details seem to have been mashed up in translation. The quotes are particularly intriguing... as we doubt that most licensed pilots would put any such matter quite as has been reported. The quotes sure seem to have been edited/assembled rather disjointedly by someone who is not that familiar with aviation--especially for what we're told by some sources is a routine altitude bust. The FAA confirms the bust but hasn't given us details, but we're working it and will follow up, as appropriate.

F rom World Entertainment News Network...

Movie star Morgan Freeman's flying dreams have been dealt a severe blow - he has been grounded by the Federal Aviation Administration (FAA) for breaking altitude rules.

The "Driving Miss Daisy" star said he was reprimanded when he failed to observe landing regulations at Teterboro Airport in New Jersey, and now he has no idea when he'll be able to take off again.

The actor explains, "I'm being censored by the FAA and they're going to ground me. The hardest thing about flying is holding altitude. It's a three-dimensional effort."

"I was grounded because I was flying into Teterboro and it was a very busy day. In every airport they have what you call an approach which is how you're going to get in with step downs - flying technique for lowering altitude."

"But you don't go to these altitudes until you're told. So I'm going into Teterboro and I was at 3,000 feet coming down from an altitude of 21,000 feet. I'm looking at the approach plate, which reads what altitude your plane should be at, and it says I should be at 2,000 feet in the air. So I better get down there and I got down to 2,000 feet."

"And the control tower said, 'What are you doing?' And I said, 'I'm following the approach.' They said, 'You weren't cleared for 2,000 feet, go back up.' If you change your altitude by five hundred feet the computer automatically catches it."

(This article appears by arrangement between Aero-News Network and World Entertainment News Network)

FMI: www.wenn.com

Advertisement

More News

NTSB Final Report: Patriot Aircraft LLC CX1900A

After Draining Both Wing Fuel Tanks, A Significant Amount Of Water Was Observed In The Right Wing Fuel Tank Analysis: The pilot, who was also the owner of the experimental amateur->[...]

Aero-News: Quote of the Day (12.06.25)

“Airbus apologises for any challenges and delays caused to passengers and airlines by this event. The Company thanks its customers, the authorities, its employees and all rel>[...]

ANN's Daily Aero-Term (12.06.25): High Speed Taxiway

High Speed Taxiway A long radius taxiway designed and provided with lighting or marking to define the path of aircraft, traveling at high speed (up to 60 knots), from the runway ce>[...]

ANN's Daily Aero-Linx (12.06.25)

Aero Linx: Taylorcraft Foundation, Inc. The Taylorcraft Foundation is exclusively organized for charitable, educational & scientific activities and will preserve the history an>[...]

Airborne-NextGen 12.02.25: Honda eVTOL, Arctus High-Alt UAS, Samson Patent

Also: USAF Reaper Accident, Baikonur Damage, Horizon eVTOL IFR/FIKI, New Glenn Update Honda has outlined its clearest timeline yet for its entry into the world of electric vertical>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC