FAA Issues Emergency AD For G150 Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-07.21.25

Airborne-NextGen-07.15.25

AirborneUnlimited-07.16.25

Airborne-FlightTraining-07.17.25

AirborneUnlimited-07.18.25

Thu, Jun 28, 2012

FAA Issues Emergency AD For G150 Airplanes

Inspection Found Structural Damage To, And Separation Of Wing Ribs From Wing Planks

The FAA has issued an emergency airworthiness directive (AD) 2012-13-51 for Gulfstream Aerospace LP (Type Certificate previously held by Israel Aircraft Industries, Ltd.) Model Gulfstream G150 airplanes.

The Civil Aviation Authority of Israel (CAAI), which is the airworthiness authority for Israel, notified the FAA that an unsafe condition may exist on Gulfstream Aerospace LP Model Gulfstream G150 airplanes. The CAAI advises that fasteners protruding from the lower wing surface were discovered during a post-flight inspection. Investigation revealed structural damage to (and separation of) ribs from wing planks. Further inspection showed that the inboard vent tube hole was completely covered with sealant, which blocked airflow through the vent. This condition was also found on some airplanes in production. Under these conditions, the rise of internal pressure during pressure fueling or due to thermal expansion is sufficient to damage the wing. This condition, if not detected and corrected, could compromise the integrity of the wing structure.

This product has been approved by the aviation authority of another country, and is approved for operation in the United States. Pursuant to our bilateral agreement with the State of Design Authority, we have been notified of the unsafe condition described in the MCAI referenced above. The FAA is issuing this AD because we evaluated all pertinent information and determined the unsafe condition exists and is likely to exist or develop on other products of the same type design.

This AD requires a one-time detailed or borescope inspection of the left- and right-hand inboard vent holes for debris or obstructions, and repair if necessary. This AD also requires reporting positive inspection findings to the manufacturer. The inspection is to be done before further flight.

FMI: AD

Advertisement

More News

Airborne 07.18.25: Will MOSAIC Be Announced Tuesday???, 12 Hot News Items

Also: DeltaHawk, Piper, Hartzell, High Flying Models & Bob Hoover Legacy, SUN n FUN26 and Affordable Flying Expo 2025 -- and MUCH More. In an exclusive interview earlier this m>[...]

Airborne-Flight Training 07.10.25: ATC School, Air Race Classic, Samson School

Also: Sully v Bedford, Embraer Scholarships, NORAD Intercepts 11, GAMA Thankful Middle Georgia State University will be joining the Federal Aviation Administration’s fight ag>[...]

Airborne 07.18.25: Will MOSAIC Be Announced Tuesday???, 12 Hot News Items

Also: DeltaHawk, Piper, Hartzell, High Flying Models & Bob Hoover Legacy, SUN n FUN26 and Affordable Flying Expo 2025 -- and MUCH More. In an exclusive interview earlier this m>[...]

ANN's Daily Aero-Linx (07.16.25)

Aero Linx: Minnesota Seaplane Pilots Association (MSPA) We are the Minnesota Seaplane Pilots Association (MSPA), a nonprofit organization dedicated to supporting and empowering sea>[...]

ANN's Daily Aero-Term (07.16.25): Preferred IFR Routes

Preferred IFR Routes Routes established between busier airports to increase system efficiency and capacity. They normally extend through one or more ARTCC areas and are designed to>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC