Thu, Sep 29, 2005
Michoud Has Recovered Enough To Start Research On STS-114 Foam
Loss
Less than a month after being hit by Hurricane Katrina, NASA's
Michoud Assembly Facility in New Orleans is gearing up to restart
processing space shuttle fuel tanks. The work will address foam
loss during Space Shuttle Discovery's launch in July.

External tank #119, which is expected to be used in the next
shuttle mission, departed NASA's Kennedy Space Center in Florida
today. The huge, orange external tank is being transported by
NASA's solid rocket booster retrieval ship Freedom Star. It will
travel down Florida's Banana River en route to the Gulf of
Mexico-Mississippi River outlet on its 900-mile journey. It's
expected to arrive at Michoud in four or five days.
"The facility is ready to receive the tank and the Michoud team
is eager to get their hands on it," said External Tank Project
Manager Sandy Coleman. Michoud workers will begin limited testing
on the tank as soon as it arrives. Hurricane recovery efforts at
the facility have progressed better than anticipated. Power has
been restored to the entire Michoud complex, and temporary repairs
have been made to damaged buildings. External tank #120 will be
shipped from Kennedy to the facility in the next few weeks.
The external tank, 27.6 feet wide and 154 feet tall, is the
largest element of the shuttle system, which also includes the
orbiter, main engines and solid rocket boosters. Despite the tank's
size, its aluminum skin is only one-eighth-inch thick in most
areas, but withstands more than 6.5 million pounds of thrust during
liftoff and ascent. The tank is the only shuttle component that
cannot be reused.

During a launch, the external tank delivers 535,000 gallons of
liquid hydrogen and oxygen propellants to the three main engines,
which power the shuttle to orbit. The tank is covered by
polyurethane-like foam, with an average thickness of about one
inch. The foam insulates the propellants, keeps ice from forming on
the tank's exterior and protects its aluminum skin from aerodynamic
heat during flight.
The Space Shuttle Propulsion Office at NASA's Marshall Space
Flight Center manages the tank project. Lockheed Martin Space
Systems Co., New Orleans, is the primary contractor.
More News
Aero Linx: Vintage Sailplane Association The purpose of the Vintage Sailplane Association (VSA) is to promote the acquisition, restoration and flying of vintage sailplanes by its m>[...]
Smoke Began Entering The Cockpit During The Landing Flare, And Then The Pilot Noticed Flames... Analysis: The pilot reported that about 30 minutes into the local flight, he heard s>[...]
Make Sure You NEVER Miss A New Story From Aero-News Network Do you ever feel like you never see posts from a certain person or page on Facebook or Instagram? Here’s how you c>[...]
From 2010 (YouTube Edition): The Red Tail Project Continues Effort Towards ‘Rise Above Program’ The Red Tail Project is a true example of this unbreakable spirit. In 20>[...]
Also: 1st-Ever Space Crime Was a Fraud, IAE Buys Diamonds, Kennon Bows Out, Perseverance Rover An interesting moment came about this past Sunday as ANN CEO, Jim Campbell, noted tha>[...]