Tue, Jun 05, 2012
AD NUMBER: 2012-11-03
PRODUCT: All Boeing Model 777 airplanes
SUBJECT: Airworthiness Directive 2012-11-03
ACTION: Final Rule
SUMMARY: This AD was prompted by four reports of retaining cross bolt hardware not fully engaged into the fuse pins of the forward trunnion lower housing of the main landing gear (MLG), which could result in an incorrect MLG emergency landing break-away sequence. This AD requires a detailed inspection of the fuse pin cross bolts and fuse pins of the left and right MLG forward trunnion lower housing to verify that the cross bolts are correctly installed and that there are no missing fuse pins, and replacement of the fuse pins if necessary.
The FAA is issuing this AD to prevent an incorrect emergency landing MLG break-away sequence, which could result in puncturing of the wing box and consequent fuel leaks and an airplane fire. Failure of the fuse pins could also result in a possible landing gear collapse causing a runway excursion during take-off or landing.
DATES: This AD is effective July 9, 2012.
Numerous Flights Cancelled Saturday Britain's Air Traffic Control system suffered what was described as a "technical problem" Saturday resulting in widespread cancellations of flig>[...]
Also: Bell 47 Update, USSC Aero-Legal Decision Coming, Evergreen Kaput, Blue Angels Full Sked The U.S. Air Force Thunderbirds demonstration team is on the airshow circuit again. Ev>[...]
Designed To Pull Spacecraft Away From A Failing Booster In Launch Emergency Scenario NASA engineers and contractors have successfully completed the Orion Launch Abort System (LAS) >[...]
The Aero Experience A blog focusing on GA and sport aviation in the midwest.>[...]
The runway length declared available and suitable for the ground run of an airplane taking off.>[...]