Wed, Jun 20, 2012
AD NUMBER: 2012-12-09
PRODUCT: Boeing Model 717-200 airplanes.
SUBJECT: Airworthiness Directive 2012-12-09
ACTION: Final Rule
SUMMARY: This AD was prompted by reports of cracks found on the center section ribs of the horizontal stabilizers. This AD requires repetitive inspections for cracking of the aft face of the left and right rib hinge bearing lugs of the center section of the horizontal stabilizer; and crack measurement, repairs, post-repair repetitive inspections, and installation of a new center section rib if necessary. The FAA is issuing this AD to detect and correct cracking in the left and right bearing lugs of the rib hinge spreading at the same time, which could result in failure of both hinge bearing lugs.
Failure of the hinge bearing lugs could result in the inability of the horizontal stabilizer to sustain flight loads and thereby reduce the controllability of the airplane.
DATES: This AD is effective July 23, 2012.
Republic Airways Completes Sale To Investment Fund Republic Airways Holdings Inc. has closed on the sale of Frontier Airlines to an investment fund affiliated with Indigo Partners >[...]
It's Not Enough To Simply Get More Power... You Have To Do It Right ANN CEO and Editor-In-Chief Jim Campbell meets with Jim Shafer of Power Flow Exhaust Systems at EAA AirVenture 2>[...]
AD NUMBER: 2013-24-14 PRODUCT: Diamond Aircraft Industries GmbH Models DA40 and DA40F airplanes.>[...]
AD NUMBER: AD 2013-22-19 PRODUCT: All Gulfstream Aerospace Corporation Model GV and GV-SP airplanes.>[...]
NetJets Association of Shared Aircraft Pilots The NetJets Association of Shared Aircraft Pilots, more commonly referred to as NJASAP, represents the professional interests of the 3>[...]