Contractor Agrees To Lower Controversial San Diego Office Tower | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.22.24

Airborne-Unlimited-04.16.24

Airborne-FlightTraining-04.17.24 Airborne-AffordableFlyers-04.18.24

Airborne-Unlimited-04.19.24

Join Us At 0900ET, Friday, 4/10, for the LIVE Morning Brief.
Watch It LIVE at
www.airborne-live.net

Wed, Jun 27, 2007

Contractor Agrees To Lower Controversial San Diego Office Tower

Will Remove Top 20 Feet From Building Near MYF

In a Tuesday night press conference -- held in the shadow of a controversial office tower project adjacent to San Diego's Montgomery Field (MYF) -- an attorney for construction contractor Sunroad Enterprises announced the company will agree to lower the height of the building by 20 feet, to bring the building into compliance with FAA height restrictions.

As ANN reported earlier this week, Mayor Jerry Sanders ordered the contractor to remove the top 20 feet of its Kearny Mesa office project, because the 180-foot building was deemed a hazard to air navigation by the FAA.

Sanders was only the latest entity to contest the project, eventually agreeing with City Attorney Michael Aguirre the tower should be lowered. Stating it had a valid city building permit for the project, Sunroad had finished the project despite warnings from the FAA, the California Division of Aeronautics, and local pilots. The Aircraft Owners and Pilots Association was party to a lawsuit against the contractor, demanding the tower be lowered.

Aguirre has alleged the mayor acted corruptly by allowing Sunroad, a campaign donor, to build a tall building so close to the airport in the first place.

A study by the FAA showed the tower, while not on airport property, sits in the path of IFR traffic circling to land on runways 23, 10L and 10R. The only published instrument procedures for the airport are to runway 28R. If winds or a runway closure require a landing on runways 23, 10L or 10R, a pilot must fly the procedure to 28R and circle to another runway after descending to minimums.

Therein lies the problem with the tower's current 180-foot height, which is 20 feet above the maximum height allowed in the area. Pilots circling to the north would fly very near -- if not directly over -- the new building.

According to a ruling by Mayor Sanders, Sunroad has until August 25 to remove the top 20 feet of the tower.

FMI: www.faa.gov, http://gc.kls2.com/airport/MYF, www.sunroadenterprises.com, www.aopa.org

Advertisement

More News

Airborne 04.16.24: RV Update, Affordable Flying Expo, Diamond Lil

Also: B-29 Superfortress Reunion, FAA Wants Controllers, Spirit Airlines Pulls Back, Gogo Galileo Van's Aircraft posted a short video recapping the goings-on around their reorganiz>[...]

ANN's Daily Aero-Term (04.20.24): Light Gun

Light Gun A handheld directional light signaling device which emits a brilliant narrow beam of white, green, or red light as selected by the tower controller. The color and type of>[...]

Aero-News: Quote of the Day (04.20.24)

"The journey to this achievement started nearly a decade ago when a freshly commissioned Gentry, driven by a fascination with new technologies and a desire to contribute significan>[...]

Aero-News: Quote of the Day (04.21.24)

"Our driven and innovative team of military and civilian Airmen delivers combat power daily, ensuring our nation is ready today and tomorrow." Source: General Duke Richardson, AFMC>[...]

ANN's Daily Aero-Term (04.21.24): Aircraft Conflict

Aircraft Conflict Predicted conflict, within EDST of two aircraft, or between aircraft and airspace. A Red alert is used for conflicts when the predicted minimum separation is 5 na>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC