AD: Eclipse Aviation | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-06.09.25

Airborne-NextGen-06.10.25

AirborneUnlimited-06.04.25

Airborne-AffordableFlyers-06.05.25

AirborneUnlimited-06.06.25

Mon, Jun 25, 2007

AD: Eclipse Aviation

AD NUMBER: 2007-13-11
MANUFACTURER: Eclipse Aviation
SUBJECT: Airworthiness Directive 2007-13-11
SUMMARY:
The FAA is adopting a new airworthiness directive (AD) for all Eclipse Aviation Corporation (Eclipse) Model EA500 airplanes. This AD requires you to incorporate information into the Limitations section of the airplane flight manual (AFM) that will require operation only in day visualflight rules (VFR), allow only a VFR flight plan, and maintain operation with two pilots. This AD is being issued because of three instances of loss of primary airspeed indication due to freezing condensation within the pitot system. The loss of air pressure in the pitot system could cause the stall warning to become unreliable and the stick pusher, overspeed warning, and autopilot to not function. The concern is heightened by the aerodynamic characteristics of the Eclipse Model EA500 airplane, which relies on the stall warning and the stick pusher to alert the pilot prior to the loss of aircraft control. The standby airspeed is reliable and not affected by this failure mode. Atemporary AFM revision prohibits operation in instrument meteorological conditions (IMC), requires two pilots, and limits the airspeed and altitude envelope if the event occurs in flight. The AFM limitations and FAA operational rules allow Model EA500 flight crews to file an instrumentflight rule (IFR) flight plan even though the airplane is not approved for flight in IMC. This potentially causes an undue workload burden and confusion when the pilot has to refuse any instructions that take them into IMC. We are issuing this AD to prevent an unsafe condition whenAir Traffic Control's (ATC's) ability to maintain traffic separation is compromised because anairplane on an IFR flight plan cannot accept a flight plan into IMC.

FMI: www.faa.gov/regulations_policies/airworthiness_directives/

Advertisement

More News

Classic Aero-TV: Legacy of a Homebuilt P-38 Replica

From Oshkosh 2024 (YouTube Edition): Stunning Aircraft is a WWII Era Dream Come True William Presler, owner of Volar Avionics and Restorations, was given the opportunity to showcas>[...]

ANN's Daily Aero-Linx (06.08.25)

Aero Linx: USAF E-9A The E-9A is a twin turboprop used as a surveillance platform to ensure the Gulf of Mexico waters are clear of civilian boaters and aircraft during live missile>[...]

NTSB Final Report: Avid Magnum

Pilot’s Failure To Maintain Clearance From The Water While Maneuvering In Low Visibility Conditions Analysis: During a local personal sightseeing flight, the pilot was maneuv>[...]

ANN's Daily Aero-Term (06.08.25): Landing Area

Landing Area Any locality either on land, water, or structures, including airports/heliports and intermediate landing fields, which is used, or intended to be used, for the landing>[...]

Aero-News: Quote of the Day (06.08.25)

"I look forward to thoroughly evaluating Bryan Bedford to serve as FAA administrator, focusing on his qualifications, and the experience that will be needed to boldly modernize Ame>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2025 Web Development & Design by Pauli Systems, LC