NTSB Prelim: Aviat A-1B | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.22.24

Airborne-Unlimited-04.16.24

Airborne-FlightTraining-04.17.24 Airborne-AffordableFlyers-04.18.24

Airborne-Unlimited-04.19.24

Join Us At 0900ET, Friday, 4/10, for the LIVE Morning Brief.
Watch It LIVE at
www.airborne-live.net

Mon, Mar 22, 2021

NTSB Prelim: Aviat A-1B

The Track Then Made A Second, Tighter, 360-Degree Turn At 49 Knots And Decreasing

Location: Berwyn, NE Accident Number: CEN21FA150
Date & Time: March 6, 2021, 06:10 Local Registration: N166WW
Aircraft: Aviat A-1B Injuries: 1 Fatal
Flight Conducted Under: Part 91: General aviation - Personal

On March 6, 2021, about 0610 central standard time, an Aviat A-1B airplane, was destroyed when it was involved in an accident near Berwyn, Nebraska. The pilot was fatally injured. The airplane was operated as a Title 14 Code of Federal Regulations (CFR) Part 91 personal flight.

The purpose of the flight was to fly from the pilot’s private runway to Holyoke, Colorado, for an annual inspection. About 0555, the airplane was first observed on primary radar about 1/2 mile south of the private runway. The airplane track proceeded generally west-southwest about 87 knots. About 11 miles from the runway, it made a left turn toward the south. The track then made right 360-degree turn and the speed of the airplane increased to about 114 knots. The track then made a second, tighter, 360-degree turn at 49 knots and decreasing. The track then zig zagged generally eastbound between 20-30 knots until the track terminated at 0609.

When the airplane did not arrive at its destination, an ALNOT was issued; shortly thereafter, it was located about 1,000 ft from the last radar point. The airplane impacted a field perpendicular to a gully in a very rural area; the debris field was about 300 ft long. The first identified point of impact was a long narrow area of disturbed dirt with the right wingtip nearby. Followed by two slash marks consistent with propeller blade slices, then a large area of disturbed dirt with propeller blade fragments. The main wreckage came to rest at the bottom of a gully, and the last piece of debris was the engine. There were no witnesses to the accident.

At the time of the accident the moon was 22.97 degrees above the horizon, and at third quarter phase. Its illumination was 45.1% of the moon’s full potential. There were no high-altitude cloud layers. Dawn started at 0636 and sunrise was at 0704.

FMI: www.ntsb.gov

Advertisement

More News

ANN's Daily Aero-Linx (04.17.24)

Aero Linx: Space Medicine Association (SMA) The Space Medicine Association of the Aerospace Medical Association is organized exclusively for charitable, educational, and scientific>[...]

ANN's Daily Aero-Term (04.17.24): Jamming

Jamming Denotes emissions that do not mimic Global Navigation Satellite System (GNSS) signals (e.g., GPS and WAAS), but rather interfere with the civil receiver's ability to acquir>[...]

ANN's Daily Aero-Linx (04.18.24)

Aero Linx: Warbirds of America The EAA Warbirds of America, a division of the Experimental Aircraft Association in Oshkosh, Wisconsin, is a family of owners, pilots and enthusiasts>[...]

Aero-News: Quote of the Day (04.18.24)

"From New York to Paris, this life-size replica of the Webb Telescope inspired communities around the world and, in doing so, invited friends and families to explore the cosmos tog>[...]

ANN's Daily Aero-Term (04.18.24): Hold-In-Lieu Of Procedure Turn

Hold-In-Lieu Of Procedure Turn A hold-in-lieu of procedure turn shall be established over a final or intermediate fix when an approach can be made from a properly aligned holding p>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC