Mon, Oct 30, 2017
Testing Conducted At Arnold AFB In Tullahoma, TN
The F135 engine, which powers the fifth generation F-35 Lightning II, has successfully demonstrated full-life capability of its cold section (components consisting of the fan and compressor) during accelerated mission testing (AMT) at the Arnold Engineering Development Complex, located on Arnold Air Force Base in Tullahoma, TN. This achievement of 9,400 total accumulated cycles (TAC) – the equivalent of approximately fourteen years of operation or approximately 2,000 F-35 missions – was completed while running the engine at extreme conditions to simulate operational engines.
"Demonstrating the full life capability of the F135 engine's cold section represents a key milestone for the program," said John Wiedemer, vice president, F135 Program, Pratt & Whitney. "This milestone follows the successful full-life testing of the F135's hot section in 2015 and validates the excellent engine durability we're seeing in early fleet exposure. This shows we have a robust propulsion system capable of providing full mission capability to the warfighter."
AMT is conducted as a means of testing and validating reliability and maintainability performance for the engine over the span of its life. It also helps identify any potential issues well before they would be encountered by the operational fleet. Made possible by the U.S. Air Force Component Improvement Program, this test was focused on the Conventional Takeoff and Landing (CTOL) engine variant which powers both the F-35A and F-35C models. Testing took place between August 2014 and October 2017, and consisted of two hot section intervals, which is equivalent to the cold section life.
During AMT, F135 engines accumulate equivalent flight hours under monitored conditions and at a faster rate than in operating aircraft. The advanced data collection from this program identifies improvement opportunities aimed at maximizing readiness within the life cycle cost expectations for the entire F135 CTOL powered F-35 fleet.
"We're proud to work with our U.S. Air Force customer on this important accelerated mission testing as part of the Component Improvement Program," added Mr. Wiedemer. "This testing provides us an opportunity to complete a detailed inspection of the engine years before the operational fleet reaches this point to improve mission readiness, reliability and maintainability as well as reduce engine life cycle cost."
(Image provided with Pratt & Whitney news release)
More News
Chaff Thin, narrow metallic reflectors of various lengths and frequency responses, used to reflect radar energy. These reflectors, when dropped from aircraft and allowed to drift d>[...]
“Today, XB-1 took flight in the same hallowed airspace where the Bell X-1 first broke the sound barrier in 1947. I’ve been looking forward to this flight since founding>[...]
“Teaming up with the EAA and Berlin Express for this event in Cincinnati will give warbird fans a unique opportunity to see the aircraft that helped defend freedom and gave t>[...]
Hazardous Weather Information Summary of significant meteorological information (SIGMET/WS), convective significant meteorological information (convective SIGMET/WST), urgent pilot>[...]
Aero Linx: The Nebraska Aeronautics Commission The Nebraska Aeronautics Commission was created by the 1935 Legislature to oversee the development of aviation in the state. The Comm>[...]