NTSB Issues Preliminary Report On NC King Air Downing | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.01.24

Airborne-Unlimited-04.16.24

Airborne-FlightTraining-04.17.24 Airborne-Unlimited-04.11.24

Airborne-Unlimited-04.12.24

Join Us At 0900ET, Friday, 4/10, for the LIVE Morning Brief.
Watch It LIVE at
www.airborne-live.net

Thu, Feb 14, 2008

NTSB Issues Preliminary Report On NC King Air Downing

Notes No Mechanical Problems With Aircraft

Editor's Note: Below is the unedited text of the National Transportation Safety Board's preliminary report on the February 1 downing of a King Air C90A near Elkins, NC. As ANN reported, six persons onboard were killed after the King Air missed its first approach to Mount Airy Airport (MWK) and crashed as it circled back.

Notably, the NTSB has found no evidence of mechanical issues with the accident aircraft -- and confirmed hard IFR conditions prevailed at the airport at the time of the crash.

NTSB Identification: NYC08MA090
14 CFR Part 91: General Aviation
Accident occurred Friday, February 01, 2008 in Mount Airy, NC
Aircraft: Raytheon Aircraft Corporation C90A, registration: N57WR
Injuries: 6 Fatal.

This is preliminary information, subject to change, and may contain errors. Any errors in this report will be corrected when the final report has been completed.

On February 1, 2008, about 1128 eastern standard time, a Raytheon Aircraft Company C90A, N57WR, was substantially damaged when it impacted terrain while executing the missed approach for the Global Positioning System (GPS) approach to runway 36 at Mount Airy/Surry County Airport (MWK), Mount Airy, North Carolina. The certificated commercial pilot and the five passengers were fatally injured. Instrument meteorological conditions prevailed, and an instrument flight rules flight plan had been filed for the flight, which departed Polk County Airport/Cornelius Moore Field (4A4), Cedartown, Georgia. The personal flight was conducted under 14 Code of Federal Regulations Part 91.

According to witness statements, rain, low cloud ceilings, and fog were present in the local area. The pilot was first heard to check in on MWK's common traffic advisory frequency (CTAF), and announce "final 36, Mount Airy." The airplane was then observed to "break out of the clouds" at approximately 500 feet above ground level, in close proximity to the airport, and then descend "rapidly" for about 200 feet. It was then observed to "side step" to the left of the runway, and fly parallel to it for its entire length. The airplane then made a "hard" left turn at the end of the runway and climbed into the "fog." A few minutes later, it came out of the bottom of the clouds in a nose down attitude, disappeared behind trees east of the airport, and the sound of impact was heard.

According to Federal Aviation Administration (FAA) preliminary air traffic control voice, and radar plot data, the airplane departed 4A4 at approximately 1024 and arrived in the vicinity of MWK approximately 50 minutes later.

After arrival in the local area, the pilot contacted Greensboro Approach and advised the controller that he was level at 4,000 feet above mean sea level (msl) on a northeast-bound track toward MWK. The controller then instructed the pilot to maintain 4,000 feet msl until crossing the EDLIF waypoint, fly the GPS approach to runway 36 at MWK, and switch to the CTAF for the airport.

Radar data obtained from the terminal radar approach control facility at Greensboro, North Carolina, contained recorded radar targets for the accident airplane from 1112 until 1128. During the GPS approach to runway 36, the airplane was recorded tracking inbound to the airport. The last radar target on final was recorded at 1125:40, at 2,000 feet msl, approximately 1.25 nautical miles from the runway 36 threshold. No more radar targets were recorded until 1127:49, when the target representing the airplane reappeared on radar on a left base leg at 2,300 feet msl. It then continued to turn left to about a 020-degree heading, overfly the threshold of runway 36 at 2,300 feet, and continue on a 020-degree heading for another 14 seconds. The last target was recorded to the east of the airport 0.6 nautical miles south of the accident site, at 2,700 feet msl.

The accident occurred during the hours of daylight. The wreckage was located at 36 degrees, 27.797 minutes north latitude, 80 degrees, 33.042 minutes west longitude, at an elevation of 1,219 feet msl.

The airplane came to rest in a residential area, upright on a magnetic heading of 200 degrees. Its angle of impact was approximately 45 degrees nose down. The fuel system was compromised in multiple locations and the ground around the wreckage was fuel soaked. No debris path existed, and the initial impact point was collocated with the remains of the airplane. All major components of the airplane were accounted for at the accident site.

Examination of the wreckage on scene revealed no evidence of any preimpact malfunctions, structural failures, or in-flight fire. Evidence did indicate that the landing gear was in the extended position prior to impact, and the flaps were in the approach position. Both propellers displayed S-bending, and no anomalies were identified with either engine. The rudder trim tab actuator correlated to 1 to 2 degrees of right rudder trim. The elevator trim actuators were measured and found to be in a position which correlated to 6 to 7 degrees nose up trim, and the electric pitch trim was off.

According to FAA records, the pilot held a commercial pilot certificate with ratings for airplane multiengine land, airplane single engine land, and instrument airplane. He reported 780 total hours of flight experience on his most recent application for an FAA second-class medical certificate, dated August 6, 2007.

According to FAA records, the airplane was manufactured in 2005. According to maintenance records, the airplane's most recent manufacturer's recommended inspection program, phase inspection, was completed on November 9, 2007. At that time the airplane had accrued 799.7 total hours of operation.

A weather observation taken about 13 minutes after the accident, included; calm winds, visibility 2 and 1/2 miles in heavy drizzle, a broken cloud layer at 300 feet, an overcast cloud layer at 600 feet, temperature 1 degree Celsius (C), dew point 0 degrees C, and an altimeter setting of 29.90 inches of mercury.

The wreckage was retained by the National Transportation Safety Board for further examination.

FMI: www.ntsb.gov

Advertisement

More News

ANN's Daily Aero-Linx (04.15.24)

Aero Linx: International Flying Farmers IFF is a not-for-profit organization started in 1944 by farmers who were also private pilots. We have members all across the United States a>[...]

Classic Aero-TV: 'No Other Options' -- The Israeli Air Force's Danny Shapira

From 2017 (YouTube Version): Remembrances Of An Israeli Air Force Test Pilot Early in 2016, ANN contributor Maxine Scheer traveled to Israel, where she had the opportunity to sit d>[...]

Aero-News: Quote of the Day (04.15.24)

"We renegotiated what our debt restructuring is on a lot of our debts, mostly with the family. Those debts are going to be converted into equity..." Source: Excerpts from a short v>[...]

Airborne 04.16.24: RV Update, Affordable Flying Expo, Diamond Lil

Also: B-29 Superfortress Reunion, FAA Wants Controllers, Spirit Airlines Pulls Back, Gogo Galileo Van's Aircraft posted a short video recapping the goings-on around their reorganiz>[...]

ANN's Daily Aero-Term (04.16.24): Chart Supplement US

Chart Supplement US A flight information publication designed for use with appropriate IFR or VFR charts which contains data on all airports, seaplane bases, and heliports open to >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC