Tue, Sep 30, 2008
Hydraulic Failures Can Lead To Controllability Issues
Citing six events involving Eurocopter AS350 helicopters in the
past six years -- including two fatal crashes -- on Tuesday the
National Transportation Safety Administration issued
recommendations to the Federal Aviation Administration and European
Aviation Safety Agency to address concerns over the helicopter's
hydraulic pump drive shafts.
Those shafts are also used in smaller EC130, the NTSB noted.
The Board recommended the FAA:
- Require Eurocopter to identify AS-350 and EC-130 helicopter
hydraulic pump drive shafts and coupling sleeves with splines that
do not meet design specifications and take appropriate action to
ensure that these parts (that is, replacement parts and parts to be
installed in new helicopters) are expeditiously removed from the
supply chain. (A-08-75)
- Require operators of Eurocopter AS-350 and EC-130 helicopters
to perform a wear check, visual inspection, and lubrication of the
hydraulic power assembly splines and coupling sleeve splines in
accordance with the latest version of the maintenance manual at the
earliest opportunity, and, thereafter, require operators to repeat
the wear check, visual inspection, and lubrication of the splined
connection at 100-hour intervals, and remove unairworthy parts from
service. (A-08-76)
The same recommendations were also made to EASA, under A-08-77
and A-08-78, respectively.
"The Safety Board Materials Laboratory examined parts of the
helicopters involved in these events, specifically the hydraulic
pump assembly and pulley assembly that provide all the hydraulic
power for the main rotor controls and the tail rotor controls," the
NTSB notes. "Staff found that the splined connection that couples
the hydraulic pump to its pulley assembly displayed excessive wear
that in some cases caused it to fail with subsequent loss of
hydraulic power. Loss of hydraulic power hinders helicopter control
and increases the possibility of a serious accident...
"The helicopter can be flown without hydraulic power (that is,
in manual mode) but doing so increases the physical demands on the
pilot and can cause a serious accident if the pilot has not
maintained familiarity with operation of the helicopter in manual
mode or if an uncommanded reversion to manual mode occurs suddenly,
especially during a critical maneuver."
FMI: Read The NTSB Recommendations Here And Here
(.pdf)
More News
Chaff Thin, narrow metallic reflectors of various lengths and frequency responses, used to reflect radar energy. These reflectors, when dropped from aircraft and allowed to drift d>[...]
“Today, XB-1 took flight in the same hallowed airspace where the Bell X-1 first broke the sound barrier in 1947. I’ve been looking forward to this flight since founding>[...]
“Teaming up with the EAA and Berlin Express for this event in Cincinnati will give warbird fans a unique opportunity to see the aircraft that helped defend freedom and gave t>[...]
Hazardous Weather Information Summary of significant meteorological information (SIGMET/WS), convective significant meteorological information (convective SIGMET/WST), urgent pilot>[...]
Aero Linx: The Nebraska Aeronautics Commission The Nebraska Aeronautics Commission was created by the 1935 Legislature to oversee the development of aviation in the state. The Comm>[...]