Watch Out! NTSB Updates Report On Runway Incursion At Logan | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

** AIRBORNE 05.24.13 Aero-TV-- CLICK HERE! ** HD iPad-Friendly Version -- AIRBORNE 05.24.13 **

** AIRBORNE 05.21.13 Aero-TV-- CLICK HERE! ** HD iPad-Friendly Version -- AIRBORNE 05.21.13 **

** AIRBORNE 04.01.13 SPECIAL EDITION of Aero-TV-- CLICK HERE! ** HD iPad-Friendly Version -- AIRBORNE 04.01.13 SPECIAL EDITION **

Tue, Jun 23, 2009

Watch Out! NTSB Updates Report On Runway Incursion At Logan

Construction Crew Crossed Active Runway

The NTSB has released a preliminary report for a runway incursion incident, in which a construction vehicle crossed an active runway at Boston's Logan International Airport as a USAirways Airbus A320 was on its takeoff roll.

According to the NTSB report:

On Thursday, June 18, 2009 at about 0636 eastern daylight time, a runway incursion occurred at the General Edward Lawrence Logan International Airport (BOS), Boston, Massachusetts involving a USAirways Airbus and a construction vehicle. The construction crew crossed runway 15R at taxiway M without approval as the Airbus was on departure roll.

According to the Federal Aviation Administration (FAA), the operator of a Ford Explorer, was not in radio communication with BOS tower air traffic controllers and had not been cleared to cross runway 15R. The Airbus rotated approximately 500 feet from the intersection of runway 15R and taxiway M as the vehicle cleared the runway edge southbound on taxiway M. The FAA stated that it appeared the tower controller was aware of the vehicle operating on taxiway M but not its intension to cross. The ground radar alerted the controllers of the event.

Taxiway M is currently under construction and runway 15R is occasionally closed due to the construction. The Airport Authority designates the runway closure with signage which was not in place during this event indicating that the runway was an active runway. The Airport Authority also indicated that all personnel were briefed that the runway was active. The driver of the
vehicle indicated that he had not been briefed to that fact. The driver has been suspended from driving on the airport pending an investigation.

The Airport Authority has ceased all construction upon completion of an investigation into the incident. USAirways flight 27, an Airbus A320, was departing Boston for Phoenix, Arizona with 84 passengers and five. There were no injuries to the crew and passengers nor damage to the airplane. The incident occurred during daylight visual meteorological conditions.

FMI: www.ntsb.gov 

Advertisement

More News

Update: Startling... FAA Wants EAA To Pay Them To Staff Oshkosh

Could The FAA Get ANY Stranger? Worse Yet... Will They? ANN RealTime News Update, 1324ET, 05.23.13: Well... the statement we were promised YESTERDAY showed up today... and it doesn>[...]

Aspen Avionics Evolution Backup Display Expands To Piper Archer, Seminole

Aspen’s All Digital Backup Display Will Give Flight-Training Students The Total Glass Panel Experience Aspen Avionics announced Tuesday that Piper Aircraft has selected the E>[...]

Classic Aero-TV: EAA’s Jack Pelton – ‘Everything’s Going to Be OK’

Building A New Future For The EAA... One Issue At A Time Originally WebCast 11.14.12: With only a couple of weeks in pocket, directing the reorganization of the EAA in the wake of >[...]

House Committee Hearing Focuses On Strategic Stepping Stones To Mars

Subcommittee Chair Call Mars Mission A Congressional Priority The House Science Committee Subcommittee on Space held a hearing Tuesday to examine possible options for the next step>[...]

Dassault Falcon Embarks On Spares Pricing Overhaul

Third Such Restructuring In 10 Years Dassault Falcon has embarked on its third parts pricing overhaul in the past 10 years, assessing the cost of over 18,500 individual items. The >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2013 Web Development & Design by Pauli Systems, LC