Tue, May 15, 2012
AD NUMBER: 2012-09-07
PRODUCT: Certain Airbus Model A319-111, -112, and -132 airplanes; Model A320-111, -211, -212, -214 and -232 airplanes; and Model A321-111, -211, -212, and -231 airplanes
SUBJECT: Airworthiness Directive 2012-09-07
ACTION: Final Rule
SUMMARY: This AD was prompted by reports that corrosion was found on the overwing refueling aperture on the top wing skin, and that for certain airplanes, repairs made using primer coating may prevent proper electrical bonding provision between the overwing refueling cap adaptor and the wing skin. This AD requires performing an electrical bonding test between the gravity fill re-fuel adaptor and the top skin panels on the left-hand and right-hand wings, and if necessary performing a general visual inspection for corrosion of the component interface and adjacent area, and repairing the gravity fuel adaptor if any corrosion is found.
The FAA is issuing this AD to detect and correct corrosion and improper bonding, which in combination with a lightning strike in this area, could create a source of ignition in a fuel tank, resulting in a fire or explosion, and consequent loss of the airplane.
DATES: This AD becomes effective June 18, 2012.
Numerous Flights Cancelled Saturday Britain's Air Traffic Control system suffered what was described as a "technical problem" Saturday resulting in widespread cancellations of flig>[...]
Also: Bell 47 Update, USSC Aero-Legal Decision Coming, Evergreen Kaput, Blue Angels Full Sked The U.S. Air Force Thunderbirds demonstration team is on the airshow circuit again. Ev>[...]
Designed To Pull Spacecraft Away From A Failing Booster In Launch Emergency Scenario NASA engineers and contractors have successfully completed the Orion Launch Abort System (LAS) >[...]
The Aero Experience A blog focusing on GA and sport aviation in the midwest.>[...]
The runway length declared available and suitable for the ground run of an airplane taking off.>[...]